Is your kitchen faucet already have a filthy Pur water filter? Here’s how to replace your PUR water filter in just 7 easy steps!
For most homes, the Pur water filter is a perfect choice. It ensures that everyone in the family has access to safe drinking water.` So, you must ensure that the filter you are using is clean of bacteria and germs.
Replacing Pur water filter is as easy as it seems. You don’t need a professional to do it because you can do it yourself! And I’m here to help you with the right way to replace it.
Why Should You Use Water Filter At Home?
It is now necessary to have a water filter installed in your home. Drinking and cooking with clean water is important for good health.
The majority of people today consume chlorine-treated water, which still contains a variety of harmful bacteria, chemicals, and other toxins. Despite having passed through a water treatment facility, the water from your tap may not be pure.
According to AquaCure, water filters eliminate harmful contaminants such as sediment, taste, odor, hardness, and bacteria from water. It provides safer and better-tasting drinking water for your family.
How Often Should You Change Your Pur Water Filter?
You should change your Pur water filter every 1 to 3 months, depending on how often you use it. It’s time to replace your water filter if you notice a decrease in flow rate.
The sediments that have collected in your filter are the cause of the decreased water flow. You don’t want your family to drink contaminated water from your faucet.
You want to make sure that your family is safe at all times. You must keep your kitchen clean because it is where they will get the foods and water that they will consume.
I also have some tips on correctly cleaning your kitchen faucet and sticky kitchen cabinets.
How To Determine If You Should Replace Your Pur Water Filter?
When the LED indicator goes red from green, you can easily tell if you need to replace your water filter. However, this isn’t totally accurate. The LED indicator serves as a reminder that there are enough contaminants in your filter.
If the filter’s flow rate slows down, then you know it’s time to change it. It doesn’t mean there’s a defect in your filter, but there are contaminants in your filter. Even if the LED indicator is still green, you should replace it.
Check out the video below!
7 Easy Steps To Replace Pur Water Filter
Step 1: Remove the water filter from your faucet by pressing the two buttons on each side.
Step 2: To loosen and remove the cap, turn it counterclockwise, and you can see the blue filter inside.
Step 3: Pull the blue filter straight up. It can be a little hard because of the rubber seal.
Step 4: Rinse the inside of the filter to get rid of some of the grit.
Step 5: Install the new filter in the right direction and give it a push. Once you hear it click, you know it’s installed. Make sure that holes inside and outside the filter are in line.
Step 6: Put back the filter’s cap. Mount it back to the faucet. You’ll hear a click, which means it’s already mounted.
Step 7: Finally, let it run for 5 minutes to ensure that the new filter is fully saturated.
Here is a video demonstrating it for you.
People Also Ask
What happens if I don’t replace my PUR water filter?
If you don’t change your carbon filter, it will absorb all the contaminants in the water it can and stop doing its job. In other words, the filter is full and can’t absorb dirt anymore.
Are water filters better than bottled water?
Both filtered and bottled water have been shown to improve health and taste, but filtered water has clear advantages in terms of cost and environmental impact.
What makes PUR different from PUR Plus?
It has two kinds of filtration: the PUR Basic filter gets rid of a small amount of contaminants, and the PUR Plus filter is made to get rid of more contaminants.
Conclusion
Water plays an important role in our daily lives. A water filter is essential for providing you with clean, contaminant-free water that tastes good and is a reliable source of hydration.
Did you know that bottled water isn’t any safer than tap water? According to a study, it is not safe and is costly for both you and the environment.
You can get the same tasty, pure water from your tap using a faucet water filter. It is also much better for the environment at a much lesser cost.
Do you find this article to be helpful? Leave your thoughts in the comments section.
